User's Manual

Charging Options

When the battery is installed in the terminal, you can use any of the peripherals listed below to

charge the battery.

• AC Power Supply to DC Jack Port direct.

• Single slot docking cradle/Single slot Ethernet cradle

• Insert the battery in the spare battery charging well in the back of either the Handy Terminal slot

cradle or Handy Terminal Ethernet cradle.

Charging Time

The standard capacity 3120mAh Li-ion battery pack requires four hours to charge to full capacity.

The Extended capacity 5200mAh Li-ion battery pack requires six hours to charge to full capacity.

4.18. Managing Main Battery Power

Data and files saved on the Handy Terminal may be stored in RAM memory; therefore, maintain a

continuous power supply to the terminal to help prevent data loss. When you remove a battery pack,

insert another charged battery pack in the Handy Terminal. If the main battery pack is low, insert

the terminal into a charging peripheral to power the terminal and begin recharging the battery.

☞NOTE: If the main battery is low and the terminal is in Suspend Mode, pressing the Power button does not wake

the HANDY TERMINAL; you must replace the discharged battery with a fully charged battery or apply AC power to

the terminal.

Checking Battery Power

Tap the battery icon to open the Power Properties. The Battery tab opens displaying the charge

status of the main battery

Main battery pack