User's Manual

40
F6
No Action
F7
No Action
F8
No Action
F9
No Action
F10
No Action
F11
No Action
F12
No Action
F13
No Action
F14
No Action
F15
No Action
F16
No Action
F17
No Action (Alpha-Numeric only)
F18
No Action (Alpha-Numeric only)
F19
No Action (Alpha-Numeric only)
F20
No Action (Alpha-Numeric only)
6. Using the Image Engine
6.1. Overview
The HANDY TERMINAL contains an N560x 2D image engine that instantly reads all popular 1D and
2D bar codes and supports omni-directional aiming and decoding or a SE-965HP 1D laser engine
that reads all popular 1D bar codes. The image engine can also capture digital images, such as
signatures and pictures.
☞NOTE: It may not read the barcode due to specular reflection if scanning from directly above. Try again after
changing angle.
☞NOTE: It may not read the barcode, if this handy terminal is too close to or too far from the barcode even if the
barcode is within the aiming range. Move the handy terminal toward or away from the barcode slowly and try again. The
aiming range is for reference only.
☞NOTE: It may not read the barcode if the barcode surface is curved. Scan the barcode at the center of the aiming
range.
☞NOTE: It may not read the barcode if the barcode surface is dirty. Try again after cleaning the barcode.
☞NOTE: It may not read the barcode if the image engine window is dirty. Try again after wiping the window with a
cotton swab or similar soft object gently.
☞NOTE: It may not read the barcode according to the direct sunlight or the brightness of the surrounding. Try again
away from the direct sunlight. Try again after adjusting the brightness of the surrounding if indoors.