User's Manual

49
Menu Item
Sub Item
This item …
Notification
Beep
Enables and disables the audio notification for decode/data
reception. There is one sound for success and another sound for an
error.
LED
Enables and disables LED notification for decode/data reception.
Vibrator
Enables and disables Vibrator notification for decode/data
reception.
Specifies the method to use when sending the decoded message to
the foreground application
Result Type
Keyboard
Event
Send decoded bar code data as Keyboard event(stroke)
Clipboard
Send decoded bar code data to clipboard(copy & paste)
Terminator
None
Add nothing at end of decoded bar code data
CRLF
Add CRLF at end of decoded bar code data
Space
Add Space at end of decoded bar code data
Tab
Add Tab at end of decoded bar code data
Auto Scan
-
Enable Auto Scan feature
Continuous Scan
-
Enable Continuous Scan feature
Setting
-
Open Scanner setting applet
Disable Scanner
-
Disable Scanner trigger
Close
-
Close Scan wedge
9. Using Control Panel
9.1. System Properties
Refer to the System control panel for information related to the system.
9.1.1. Version
1. Select
2. Start > Settings > System > About > Version tab to
determine the following information about your PDA:
 Operating system
 Processor
 Memory
 Expansion slot