User's Manual

64
caused by other devices (microwave ovens, radio transmitters, etc.).
11.2. Connecting to Other Devices
Before connecting to another device, make sure that the Bluetooth connection on the other device is
enabled.
1. Tap on the Bluetooth icon in the task bar.
The Bluetooth Handler appears on the screen.
2. Add New Device
The available services of all devices / profiles in range display in the Bluetooth Handler.
11.3. Pairing Bluetooth Devices
Connecting Bluetooth devices usually requires that they be paired; the same passkey must be
entered for each device. If you want to connect the HANDY TERMINAL to a device without any input
method (e.g., printers, headsets), refer to the user documentation that accompanied the device for
pairing information.
1. Tap on the desired device / profile in the Bluetooth Handler.
2. Tap the Next Button on the bottom
Once asked if you need to authenticate the device,
3. Enter 4 random digits and tap the Next button.
4. Enter the same digits on the other device when prompted.
5. After pairing, tap on the selected device / profile and select Active.
11.4. Setting Up a Bluetooth Printer
1. Make sure that the Bluetooth printer is on and activated.
2. If not done so already, turn Bluetooth On (by selecting the vertical arrow on the Command Bar).
3. Tap Scan Device, which runs a Bluetooth Inquiry, then SDP Query.
4. If you see your Bluetooth printer device displayed. You can press the Refresh button to search
again.
12. Single Slot cradle/Single Ethernet cradle Device
☞NOTE: The cradle is option accessory and needed to purchase separately with incidental expenses in the aftermarket
12.1. Overview
☞NOTE: The information in this chapter applies to both the Single Slot cradle and Single Ethernet cradle devices
unless otherwise indicated.
As the hub of your HANDY TERMINAL system, the Single Slot cradle charging and communication
cradle supports full-speed USB 2.0 with a workstation. The Single Ethernet cradle is identical to the