UV Disinfection Lamp Clock Wireless Charger Model: SY-W0290 I.
II. Functions A. B. Power Connection 1. Plug the USB-A end of cable into the power adapter while plug Type-C end into the product. 2. The product will be ready and stand by after all indicators are on. Wireless Charging 1. Output: 10W 2. Indicator Display: Power connection successful – blue light flashes once Standby – light off Charging – blue light on Charged – light off FOD – blue light flashes continuously C. Alarm Clock Functions 1. Four Buttons: Alarm, +, -, Light. 2.
) Click Alarm button a third time to finish time setting. 4. Alarm Setting: 1) Press “+” 3 seconds to activate or deactivate Alarm 1; Press “-” 3 seconds to activate or deactivate Alarm 2.
. Do not use wireless chargers in severe high temperature, humidity or corrosive environments to avoid leakage of damaged circuits. 5. Do not place too close to magnetic cards (ID cards, bank cards, etc.) with magnetic strips or chips to avoid magnetic card failure. 6. Keep more than 20cm between the implanted medical device (pacemaker, implantable cochlea, etc.) and the wireless charger to avoid potential disruption to medical devices. 7.
-- Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
