Owners manual
©2011 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
INSTALLATION INSTRUCTIONS
DEFENDER™ SPYDER SIDE INSERTS
Thank you for purchasing Poison Spyder
products for your Jeep. Installation is fairly simple
with the right tools and good mechanical abilities.
If you are not condent in your mechanical skills,
please seek the help of a professional to perform
the installation. Please read through these entire
instructions before proceeding with installation.
IMPORTANT: Completely install and remove
these items prior to painting or powder coating.
This will allow you to check for tment or do any
clearancing or tting ahead of time, to reduce
the chance of damage to the nish during nal
installation. Poison Spyder Customs Inc. is not
responsible for costs for or damage to paint or
powder coat nish under any circumstances,
including paint or powder coat of incorrectly
shipped or defective parts.
PARTS LIST
Please check your packages immediately upon
arrival to ensure that everything listed is included,
and to check for damage during shipping. If
anything is missing or damaged, call Poison
Spyder at (951) 849-5911 as soon as possible.
(2) DeFender™ Spyder Side Inserts
INSTALLATION NOTES
• Fully install DeFenders™ on to the Jeep
before installing the Spyder Side Inserts.
• Spyder Side Inserts may be installed WITH
the solid inserts that come with the DeFenders,
or by themselves.
• If installing WITH the solid inserts, sandwich
the Spyder Side Insert between the DeFender™
and the solid insert. The solid insert may be
painted a contrasting color for a nice accent.
• Spyder Side Inserts may be installed by
themselves to allow for improved airow
through the engine bay. In this case they may
be installed against either the outside or inside
surface of the DeFender™. In either case, you
will need to source (14) 5/16-18 nylon insert
lock nuts from your local hardware store, and
re-use the button head cap screws that came
with the DeFenders.