Owners manual

INSTALLATION INSTRUCTIONS
Poison Spyder Customs • TJ CAGE LOWER A-PILLAR KIT INSTALL Page 2
©2010 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
FIGURE 2
7. Continue with the rest of your cage
fabrication.AttachthetubularupperA-pillars
ofyourcagetothetopsurfaceofthePoison
Spyder LowerA-Pillar.  Onlytackweldthis
jointduringinitialfabrication.Waituntilthe
entirecageiscomplete,toremovethecage
andfullyweldalloftheseams.
8. Re-installthecompletedcageintotheJeep
after nish-welding and painting or powder
coating.  Use the supplied 1/2-13 Gr8 hex
headcapscrews,washerplatesandnylon-
insertlocknutstosecurethebottomfootof
eachLowerA-Pillartotheexistingholeinthe
oorboardoftheJeep.
Congratulations, you have completed the
installation of your Poison Spyder Lower A-Pillar
Kit!