Owners manual

INSTALLATION INSTRUCTIONS
Poison Spyder Customs • JK LED Taillight Harness Installation Page 3
©2014 POISON SPYDER CUSTOMS, INC. • 951-849-5911 • WWW.POISONSPYDER.COM
describedinthepreviousstep.Forbackup
lights mounted below or next to the LED
taillight,usetheshort4”extensionharness.
Ifnobackuplightsareused,simplyleavethe
plasticplugsinplaceontheharness.
8. Use zip-ties or other means to secure all
wiringinplace,bothinsidetheJeep’scorner
cavity and wherever extension wires have
beenrouted.
9. Plug the 4” LED taillight intotheharness,
push the remainderoftheharness through
thetaillighthole,andinstallthetaillightwith
itsrubbergrommet
10. Repeat these steps for the driver’s side
harness(omittingtheproceduresfortheLED
LicensePlate&3rdBrakeLight).
Congratulations, you have completed the
installation of your Poison Spyder JK LED
Taillight Harness!