Owners manual

POISON SPYDER CUSTOMS INST-45-12-R50_A • YJ-CJ Windshield Light Bar Mounts 2

5. Install the mount on the other side simultaneously

with installing the light bar. Remember to install the rubber

liner between the mount and the windshield frame. Slide

the mounting studs on each end of the light bar into the

mounting holes at the top of each of the mounts, then use

the remaining 4 button head cap screws to secure the

mount to the windshield frame.

6. Tightenthe8buttonheadcap screws with a 3/16”

hex key or socket and ratchet, while ensuring the Rubber

Liner stays correctly aligned underneath the Light Bar

Mount. DO NOT over-tighten the stainless steel hardware.

7. Install the stud-mount nuts that came with your

light bar, adjust the aim of the bar, and tighten.

Congratulations, you have completed installation of

your Poison Spyder Windshield Light Bar Mounts.

Continue with wiring of your light bar according to the

manufacturer’s documentation for the light bar and/or

your wiring/switch setup.