Instructions / Assembly

16”
4 7/8”


9”
22”
10”
Rounter or
sand edges
to opening

14 5/8”





4 1/2”
IMPORTANT:
To ensure all curling and at iron handles can sit inside the cabinet, the back edge of
the appliance panel must sit a minimum of 9” from the inside cabinet. If you have a
center drain and need the panel to go back further past the center pipe, drill a
1 3/4” half circle into the appliance panel to gain an additional inch.
NOT INCLUDED
Support beams
Drywall screws for support beams
6 Screws to mount the mount bracket are not included.
The back of a bathroom cabinet construction is not standardized. The cabinet design must be
evaluated to determine the best installation method. DO NOT use standard screws to mount
brackets into drywall.
IMPORTANT
**
**
4