Manual

PoBlocks user manual (March 31, 2014)
11
www.poscope.com
- Device selection: this opens a device selection dialog to select a device to download the PoIL
code to.
- Monitor mode: clicking the Monitor mode button enables or disables the real-time monitor
mode (this is available after the diagram has been successfully compiled and downloaded to the
device).
- Reset PoIL core: use this command to reset the PoIL code execution.
- Stop PoIL core: this command stops the PoIL code execution.
- Execute 1 cycle (step): this command executes the PoIL code of the diagram once and switches
the PoIL core state back into STOPPED mode.
7.2. Device selection dialog
Device selection dialog is used to select a PoKeys device to work with. All detected devices are displayed
in the list and selecting a device refreshes the device information panel, giving the user information on
device's name, its serial number, current time and status of PoIL core activation. All PoKeys devices are
shipped with PoIL core disabled and user must enable the core once prior downloading the diagram to
that device. This is accomplished by clicking the 'Enable/disable' button (note: enabling PoIL core
disables keyboard macro capability of PoKeys56U devices).
PoKeys devices with a holder for a RTC battery support RTC (real time clock) that can be used for
scheduling the events. RTC in the device is set to current computer time by clicking the button 'Set time'.