Manual

PoBlocks user manual (March 31, 2014)
23
www.poscope.com
Channel B pin (Integer, 1 to 55): PoKeys pin ID as indicated on the device, used for
encoder B channel signal
Multiplier 4x (Logic): Activate the 4x multiplier for encoder signals - encoder counter
is incremented on any change of the A or B signals
Init encoder (Logic): If true, PoBlocks will initialize the encoder with the specified
settings on startup
Clear on start (Logic): If true, encoder counter will be reset on startup
Show reset input (Logic): If true, reset input is displayed
Remarks
None
16.7. IO - Digital counter
Description
Digital counter reads the value of the digital counter. Digital counter enables
counting signals of higher frequencies
Inputs
None
Outputs
Value (32-bit integer): Digital counter value
Properties
Counter pin (Integer, 1 to 55): PoKeys pin ID as indicated on the device, used as
digital counter input. Not all pins support digital counters - advise PoKeys manual
Use direction pin (Logic): If True, pin specified by Direction pin is used to define the
count direction
Direction pin (Integer, 1 to 55): PoKeys pin ID as indicated on the device, used as
digital counter direction input
Rising edge (Logic): If true, counter will be incremented on rising signal edges
Falling edge (Logic): If true, counter will be incremented on falling signal edges
Clear on start (Logic): If true, counter will be reset on startup
Show reset input (Logic): If true, reset input is displayed
Remarks
None
16.8. IO - Sensor value
Description
Sensor value outputs the current value of the selected sensor
Inputs
None
Outputs
Value (32-bit integer): Sensor value
Sensor OK (Logic): Sensor status - 0 if sensor is inactive or error occured
Properties
Sensor ID (Integer, 1 to 27): PoKeys sensor ID as configured in PoKeys configuration -
I2C sensors have IDs between 1 and 10, 1-wire sensors have IDs between 11 and 20,
analog sensors have IDs between 21 and 27.
Remarks
None