Manual

PoBlocks user manual (March 31, 2014)
30
www.poscope.com
Outputs
Q (Logic): Latch state
Properties
Default value (Logic): Default value on reset
Retain on reset (Logic): If True, the value is saved to battery-backed RAM.
Initial value (Logic): The initial value of the retained block after it gets uploaded to
the device.
Remarks
None
16.33. Memory - JK flip-flop
Description
JK flip-flop simulates a JK flip-flop
Inputs
J (Logic): J input signal
CLK (Logic): Clock input signal
K (Logic): K input signal
Outputs
Q (Logic): Flip-flop state
Properties
Default value (Logic): Default value on reset
Retain on reset (Logic): If True, the value is saved to battery-backed RAM.
Initial value (Logic): The initial value of the retained block after it gets uploaded to
the device.
Remarks
None
16.34. Memory - D flip-flop
Description
D flip-flop simulates a D flip-flop
Inputs
D (Logic): D input signal
CLK (Logic): Clock input signal
Outputs
Q (Logic): Flip-flop state
Properties
Default value (Logic): Default value on reset
Retain on reset (Logic): If True, the value is saved to battery-backed RAM.
Initial value (Logic): The initial value of the retained block after it gets uploaded to
the device.
Remarks
None
16.35. Memory - T flip-flop
Description
T flip-flop simulates a T flip-flop
Inputs
T (Logic): T input signal
CLK (Logic): Clock input signal
Outputs
Q (Logic): Flip-flop state
Properties
Default value (Logic): Default value on reset
Retain on reset (Logic): If True, the value is saved to battery-backed RAM.
Initial value (Logic): The initial value of the retained block after it gets uploaded to
the device.
Remarks
None