Manual

PoBlocks user manual (March 31, 2014)
36
www.poscope.com
PT (32-bit integer): Timer period signal input (in ms)
Outputs
Q (Logic): Timer activation status signal
ET (32-bit integer): Timer current time signal (in ms)
Properties
None
Remarks
16.51. Trigger / timing - On timer
Description
On timer or (on delay timer) starts counting time on IN input signal rising edge and
turns on after the period defined by PT. The timer is reset if the input signal IN goes
to low state as illustrated below
Inputs
IN (Logic): Timer activation signal input
PT (32-bit integer): Timer period signal input (in ms)
Outputs
Q (Logic): Timer activation status signal
ET (32-bit integer): Timer current time signal (in ms)
Properties
None
Remarks
16.52. Trigger / timing - Off timer
Description
Off timer or (off delay timer) activates on IN high input signal state. The timer starts
counting on the IN input signal falling edge and turns off after the period defined by
PT. The counter is reset if the input signal IN goes to high state and the timer stays
activated as illustrated below
Inputs
IN (Logic): Timer activation signal input
PT (32-bit integer): Timer period signal input (in ms)
Outputs
Q (Logic): Timer activation status signal
ET (32-bit integer): Timer current time signal (in ms)
Properties
None
Remarks