Manual

PoBlocks user manual (March 31, 2014)
40
www.poscope.com
Inputs
SEL (8-bit integer): SEL
In 1-10 (32-bit integer): Input 1-10
Outputs
Out (32-bit integer): Value of the selected input
Properties
Inputs (Integer, 2 to 10): Number of inputs
Remarks
None
16.58. Extended - Deadband
Description
Deadband adds symetrical deadband effect to the input signal.
Inputs
Input (32-bit integer): Input signal
Deadband (32-bit integer): (Half-)deadband width
Outputs
Output (32-bit integer): Signal with deadband
Properties
None
Remarks
None
16.59. Extended - Limit
Description
Limit adds limit effect to the input signal.
Inputs
Input (32-bit integer): Input signal
Out min (32-bit integer): Minimum output signal value
Out max (32-bit integer): Maximum output signal value
Outputs
Output (32-bit integer): Limited signal
Properties
None
Remarks
None
16.60. Extended - Re-scale
Description
Re-scale rescales the input signal using the specified ranges
Inputs
Input (32-bit integer): Input signal
Outputs
Output (32-bit integer): Rescaled signal
Properties
Input min (Integer): Minimum value of the input signal
Input max (Integer): Maximum value of the input signal
Output min (Integer): Output signal at the minimum input signal
Output max (Integer): Output signal at the maximum input signal
Limit output (Logic): Limit output to the specified range
Remarks
None
16.61. Extended - LCD UI
Description
LCD UI is used to configure user interface on alphanumeric LCD. LCD UI supports
multiple LCD layouts (LCD contents), which can be selected/switched using the
'Layout' input. Each layout can contain different static (text) and dynamic (block