User Manual

PoKeys user manual
14
www.poscope.com
a) E-stop switch is connected to dedicated 4-pin E-stop connector between pins 2 and 3.
Jumper 'NeST' must be removed and inserted into the pendant connector between pins 4
and 6
b) E-stop switch is connected to pendant connector (between pins 4 and 6). Jumper 'NeST' must
be present
c) Two E-stop switches are connected - one to dedicated 4-pin E-stop connector (betwen pins 2
and 3) and one to pendant connector (between pins 4 and 6).