User Manual

PoKeys user manual
25
www.poscope.com
6.3. Using Ethernet - PoKeys57CNC connected to a network with DHCP server
Network firewalls must allow all traffic on TCP/UDP port 20055 between PoKeys57CNC device and
PoKeys-related software running on a computer.
Step 1: Locate ethernet ports on your router (1)
and PoKeys57CNC board (2) and connect them
with RJ-45 cable (standard network cable).
Step 2: Connect the PoKeys57CNC board to an
appropriate power supply (3).
Step 3: Install PoKeys software
6.1. Using USB and Ethernet
PoKeys57CNC device can also be connected to computer by using both the USB and Ethernet
connection. In this case, applications will detect two instances of PoKeys57CNC devices and USB
connection will be selected by default by third-party applications.
Follow the above instructions on connecting the PoKeys57CNC device over Ethernet and USB.
6.2. Motor drivers and peripherals installation
Connect motor drivers to dedicated 10-pin axis motor connectors, marked as MOTOR1, MOTOR2 …
MOTOR8.
Connect pendant to the dedicated pendant connector.