User Manual

PoKeys user manual
49
www.poscope.com
7.10. PoExtBus
PoExtBus bus support enables user to add additional ten 8-bit shift registers to add up to 80
additional digital outputs to PoKeys device.
Figure 23: PoExtBus outputs chaining
PoKeys configuration software usage
To set-up and test PoExtBus, open 'Peripherals' > PoExtBus...'. The dialog below (Figure 24) appears.
By using mouse left and right clicks, user can turn on or off each of the outputs.
Figure 24: PoExtBus setup dialog
PoExtBus connector type
- Female wire-side connector: Molex 22-01-2055
- Cable contacts: 08-50-0032 (5 pcs needed)
- Prepared cables: 88941-0700 (5 pcs needed)