User Manual

PoKeys user manual
50
www.poscope.com
7.11. PoNET
PoKeys57CNC device supports PoNET devices (such as kb48CNC CNC keyboard).
Multiple PoNET and PoExtBus devices can be linked together. While the PoNET devices and PoExtBus
devices share the same PoExtBus/PoNET connector, user should pay attention in connecting devices
of both types together (see the schematics below).
All PoNET devices must be connected in parallel to each other and directly to the PoExtBus/PoNET
connector, while the PoExtBus devices should be connected in series after the PoNET devices, as
described below
- PoNET devices must be connected in parallel to each other
- PoExtBus devices must be connected in series
- There should be no PoExtBus device between PoKeys device and PoNET devices
PoKeys
device
PoNET
device
PoNET
device
PoNET
device
PoExtBus
device
PoExtBus
device
PoKeys
device
PoNET
device
PoNET
device
PoNET
device
PoExtBus
device
PoExtBus
device