User Manual

PoKeys user manual
51
www.poscope.com
Adding new devices
After connecting new PoNET device, go to ‘Peripherals > PoNET...’. The following dialog will appear
Figure 25: PoNET settings dialog with an unconfigured device
In order to register new device, double click on the 'Unconfigured device' icon. In the next 10
seconds press any key on the device that is about to be added. If the process is successful, status LED
on the device will stop blinking and will be constantly lit. The device will also be listed as in the dialog
below:
Figure 26: PoNET settings dialog with a successfully configured device