User Manual

PoKeys user manual
53
www.poscope.com
7.12. Failsafe settings
PoKeys devices support the configuration of the failsafe state for the digital outputs, PWM outputs,
PoExtBus devices and PoKeys Pulse engine.
When the communication with the device is interrupted for longer than a period defined in the
failsafe configuration, peripherals listed above enter the failsafe mode, which can be setup in
‘Failsafe settings’ dialog (Peripherals > Failsafe settings…)
Peripheral
Failsafe setting
Digital outputs
Active Off / Active On
PoExtBus outputs
Active Off / Active On
PWM outputs
Fixed duty cycle in %
Pulse engine
No setting – Pulse engine enters emergency
mode on failsafe activation
Figure 27: Failsafe settings dialog