User Manual
Table Of Contents
- OH1_User_manual_EN
- Polar OH1 User Manual
- Updating the firmware
- Heart rate training
- Polar Flow App
- Battery
- Charging OH1 battery
- Bookmarks
- ENOTE_RF_OH1
19
CARING FOR YOUR OH1
Like any electronic device, the Polar OH1 should be kept clean and treated with care. The instructions below
will help you fulfill the guarantee obligations, keep the device in peak condition and avoid any issues in
charging or syncing. Do not machine wash the armband.
KEEP YOUR OH1 CLEAN
Wipe any dirt or mud off OH1 after each training session with a soft towel.
Keep the OH1 and OH1 holder charging contacts and USB connector clean to ensure smooth charging and
syncing.
Before charging, make sure there’s no moisture, hair, dust or dirt on the OH1 or OH1 holder charging
contacts and USB connector. Gently wipe off any dirt and blow off any dust. You can use a toothpick if needed.
Do not use any sharp tools for cleaning to avoid scratching.
Keep the OH1 conatcts clean to protect it from oxidation and other possible damage caused by dirt and salt
water (e.g. sweat or sea water). Th Do not charge the OH1 when the charging contacts are wet or sweaty.