User Manual

67
If you have specific notifications coming on to your phone that you don't want to see on your M430, you can
block individual apps from sending smart notifications to your M430. To block specific app notifications:
1. Open the Polar Flow mobile app.
2. Go to
Devices.
3. Then under M430 tap Block apps from the bottom of the page.
4. Choose which app you want to block, and tick the box next to its name.
5. Sync the changed settings to your running watch by pressing and holding the LEFT button of your
M430.
SMART NOTIFICATIONS IN PRACTICE
When getting a notification, your M430 will discreetly alert you by vibrating. A calendar event and message
alert once, while incoming calls alert until you press the button on your M430 or answer the phone. If a
notification arrives during a call alert, it will not be shown.
During a training session you can receive calls and notifications (email, calendar, apps etc.) if you have Flow
app running on your phone.
THE SMART NOTIFICATIONS FEATURE WORKS VIA BLUETOOTH CONNECTION
The Bluetooth connection and the Smart Notifications feature work between your M430 and your phone when
they are in the line of sight and within the range of 10 m /33 ft from each other. If your M430 is out of range for
less than two hours, your phone restores the connection automatically within 15 minutes when your M430
comes back within the range.
If your M430 is out of range for more than two hours, you can restore the connection when your phone and
M430 are within the Bluetooth range again by pressing and holding the BACK button on your M430.
Connection lost
This icon in the upper left corner of the display indicates that your M430 has lost the connection to your phone
and cannot receive notifications. Check that your phone is within the range of 10 m/33 ft from your Polar
device and has Bluetooth turned on.
Visit
support.polar.com/en/M430 for more instructions.