User Manual

Press and hold LIGHT > Settings
The Settings menu is displayed when pressing and holding LIGHT. In the settings menu you can change certain settings
without pausing the exercise recording. The contents of this menu vary according to the exercise type. For further
information, see 7.
Settings.
z
Prev. phase: View summary information of the previous phase or repetition (displayed when you have created an
exercise with phases with the Polar ProTrainer 5 software).
z
Keylock: Lock/unlock buttons to prevent accidental button presses.
z
Autoscr.: Select the Auto scroll On/ Off and displays will scroll during the exercise.
z
TZ Alarm: Turn target zone alarm sound on/off.
z
Change zone: Switch target zones (displayed when you have defined multiple target zones, except when an
exercise with phases is created with the Polar ProTrainer 5 software).
z
HR view: Select how to view your heart rate.
z
Seek sensor: Searches for WearLink, Speed, Cadence* and Power* data, if the signal disappears during exercise
due to interference.
z
A.Lap:Switch the automatic lap function on or off.
z
Arr. time: Set the arrival time On/Off.
Once you have changed the settings, the cycling computer will return to exercise mode.
* Optional sensor required.
Pause Exercise
Pause exercise recording by pressing STOP.
In pause mode you can:
z
Continue: Continue exercise recording.
z
Exit: Stop exercise recording.
z
Summary: View a summary of functions that were activated during exercise.
z
Settings: Change the same settings in pause mode as during exercise except display personalization which can
only be done in pause mode with the cycling computer.
z
Reset: Delete recorded exercise information. Confirm with OK and press OK again to restart recording.
Pa
g
e 8 of 105. Trainin
g
13.11.2006file://D:\User
_
manual\CS600\ch05.html