User Manual

Select File > Exercise log > Phases
The Phases menu is displayed only if the exercise is created with the Polar ProTrainer 5 software and includes phases.
In the Sport zones information view, press DOWN to view Phases information. Each phase can be viewed separately.
Scroll data of an individual phase by pressing OK. Compare phases by pressing UP or DOWN.
Phase name
Split time
Duration of current phase
Heart rate in beats per minute (bpm), alternating with a percentage of maximum heart rate (HR%) or
as a percentage of heart rate reserve (HRR%).
Maximum heart rate
Average heart rate
Increased HR / Recovery HR / HR differ.
The difference between heart rate at the beginning and end of the phase. Current heart rate in beats
per minute (bpm), alternating with a percentage of your maximum heart rate (HR%) or a percentage
of heart rate reserve (HRR% ).
Increased HR:
If heart rate was lower in the beginning of the phase than it was at the end, the
cycling computer will show the difference in heart rate (heart rate at the end minus heart rate in the
beginning). During the working phase, the cycling computer will show the increased heart rate value.
Recovery HR:
If the heart rate was higher in the beginning of the phase than it was at the end, the
cycling computer will show the difference in heart rate (heart rate in the beginning minus heart rate
at the end). During the recovery phase, the cycling computer will show the recovery heart rate value.
HR differ:
If the heart rate value was the same at the beginning and end of the phase, the cycling
computer will show an HR difference value of 0.
Speed
Maximum speed
Average speed
Distance
Pa
g
e 7 of 126. After Trainin
g
13.11.2006file://D:\User
_
manual\CS600\ch06.html