User Manual

Speed: On / Off

Select Settings > Bike > Bike 1 > Speed > On/Off

s default the speed is On for bike 1.

Select On and Teach new sensor is displayed. For further information on teaching the new sensor see Teach New Speed

Sensor.

Select Off and the computer will select the Speed sensor that already has been taught. Next time you will have to teach

the speed sensor again.

Speed settings are either done manually or with the Polar ProTrainer 5 software.

Cadence*: On / Off

You can install an optional Polar Cadence Sensor to your bicycle.

Select Settings > Bike > Bike 1 > Cadence > On/Off

Select On and Teach new sensor is displayed. For further information on teaching the new sensor see Teach New

Cadence Sensor*.

Select Off to remove cadence from all the displays.

Power*: On / Off

You can install an optional Polar Power Output Sensor on your bicycle.

Select Settings > Bike > Bike 1 > Power > On/Off

Select On and Teach new sensor is displayed. For further information on teaching the new sensor see Teach New Power

Output Sensor*.

Select Off to remove power from all displays.

Power settings: You need to enter the chain weight (g), chain length (cm/inch) and span length (cm/inch) into the cycling

computer to measure correct power information.

Select by pressing OK

z Select On/Off to set the feature on or off.

Select Set dist. to set the distance you are going to ride.

e 5 of 127. Settin

13.11.2006file://D:\User

manual\CS600\ch07.html