User Manual

If you haven’t taught speed sensor to recognize a certain bike before, speed information will not be shown.

Select > Off and the display returns to the previous menu display.

To return to time mode, press and hold the BACK button.

Once the speed sensor is taught to recognize the cycling computer, it will do so even if the sensor has been turned

off. When the speed sensor is turned back on Teach new sensor? is displayed. Select NO and Exercise displays

updated appears. If YES is selected, the monitor goes into teaching mode.

Teach New Cadence Sensor*

Select Settings > Bike > Bike1 > Cadence > On/Off

Select > On > Teach new sensor? is displayed

Select Yes to confirm teaching > Start test drive is displayed.

Make sure you are not near (40 m/131 ft) other Cadence sensors. > Completed! and Exercise displays updated

are displayed.

Select No to cancel teaching. The cycling computer will not be able to measure cadence data.

Select > Off and the display returns to the previous menu display.

Once the cadence sensor is taught to recognize to the cycling computer once, it will do so even if the sensor has

been turned off. When the cadence sensor is turned back on next time, Teach new sensor? is displayed. Select NO

and the monitor will go into On/Off mode. Select ON to activate the cadence sensor. If YES is selected, the monitor

goes into teaching mode.

Teach New Power Output Sensor*

Settings > Bike > Bike 1 > Power > On/Off

Select > On > Teach new sensor?is displayed.

Select Yes to confirm teaching > Start test drive is displayed > Completed! and Exercise displays updated are

displayed.

Select No to cancel teaching. The cycling computer will not be able to measure power data.

Select > Off > and the display returns to the previous menu display.

Once the power sensor is taught to recognize the cycling computer, it will do so even if the sensor has been turned

off. When the power sensor is turned back on, the Teach new sensor? is displayed. Select NO and Exercise

displays updated appears. The monitor will go into On/Off mode. Earlier taught power sensor is taken into use. If

e 2 of 310. Usin

a New Accessor

13.11.2006file://D:\User

manual\CS600\ch10.html