User Manual

z
Make sure the textile electrodes in the sports apparel fit snugly.
z
Make sure that the electrodes of the transmitter / sports apparel are moistened.
z
Make sure the transmitter / sports apparel is clean.
z
Make sure that there is no other heart rate transmitter within 40 m/131 ft.
z
Strong electromagnetic signals can cause erratic readings. For further information, see Precautions.
z
If the erratic heart rate reading continues despite moving away from the source of disturbance, slow down your
speed and check your pulse manually. If you feel it corresponds to the high reading on the display, you may be
experiencing cardiac arrhythmia. Most cases of arrhythmia are not serious, but consult your doctor nevertheless.
z
A cardiac event may have altered your ECG waveform. In this case, consult your physician.
…Check WearLink! is displayed and your cycling computer cannot find your heart rate signal?
z
Make sure the cycling computer is no further than 40 m/131 ft from the transmitter.
z
Make sure the transmitter belt has not loosened during exercise.
z
Make sure the textile electrodes in sports apparel fit snugly.
z
Make sure that the electrodes of the transmitter / sports apparel are moistened.
z
Make sure the transmitter / electrodes in the sports apparel are clean and undamaged.
z
If the heart rate measurement does not work with the sports apparel, try using a WearLink strap. If your heart rate
is detected with the strap, the problem is most probably in the apparel. Please contact the apparel retailer /
manufacturer.
z
If you have done all of the above-mentioned actions, and the message still appears and heart rate measurement
does not work, the battery of your transmitter may be empty. For further information, see Care and Maintenance
.
…New WearLink found. Teach new WearLink? is displayed?
If you have purchased a new transmitter as an accessory, it will have to be introduced to the cycling computer. For further
information, see Teach New Transmitter
.
If the transmitter you are using is included in the product set, and the text appears on the display, the cycling computer
may be detecting the signal of another transmitter. In that case, make sure you are wearing your own transmitter, that the
electrodes are moistened, and that the transmitter belt has not loosened. If the message still appears, the battery of your
transmitter is empty. For further information, see Care and Maintenance
.
Check Speed! is displayed?
Pa
g
e 7 of 1012. Customer Service Information
13.11.2006file://D:\User
_
manual\CS600\ch12.html