User's Manual
Table Of Contents
- Introduction
- Quick Steps
- About the Help
- Water-Resistance
- Article Bank
- Quick Guide
- Hardware
- Software
- Introduction to Software
- Introduction to Software
- Elements, settings and functions
- How to...
- _
- How to Remove Players
- Seasons and training sessions
- How to Add Phases
- How to Add Season
- How to Add Training Periods
- How to Add Training Activities
- How to Create Training Session
- How to Delete Phases
- How to Delete Season
- How to Delete Training Period
- How to Delete Training Session
- How to Modify Phases
- How to Order Training Periods
- How to Remove Training Activities
- Training session data
- Transmitters
- PDA software
- Troubleshooting
- Important Safety Information
- Regulatory Information
- Radio Frequency Technical Specifications
- Glossary
Team2 Help EN
30
Transmitters
Transmitter settings can be modified in the Transmitters tab. Transmitter settings can be modified
either one by one or as a group. Before modifying transmitter settings, transmitters must be
inserted into the charger and connected to the system. Connected and not connected
transmitters are listed separately on the transmitter list.
• To change transmitter settings, open the Transmitters tab, select a transmitter from the
list, select the correct radio button (Online or Off-season) and click the Transfer button.
• Selected transmitter settings can be transferred to all connected transmitters at once by
clicking the Transfer to all button.
Off-season mode has two additional settings. These settings are enabled when Off-season is
selected.
• Recording rate setting has two options, Every beat and Every 5 seconds. This setting
affects memory capacity. When Every beat is selected, the transmitter can record data
up to 48 hours. When Every 5 seconds is selected, the transmitter can record data up to
360 hours.
• Second settings enables you to select which data is overwritten when the memory is full.
The options are Oldest files and Only files transferred to the PC.
• When Oldest files is selected, memory cannot ever become full, but at the same
time, data may be lost if it is not transferred to the PC.
• When Only files transferred to the PC is selected, memory can become full,
but no data is lost because only transferred data is overwritten.
See also more information on
Online and off-season modes.
Base Station / USB Dongle
Before base station or USB dongle settings can be changed, the device must be connected to the
computer. The base station is connected to the system when lights 1 and 2 are lit and Team
2
PC
software is running.
When the base station is connected to the PC either with a Ethernet cable or wireless connection,
the wireless network key can be changed. Follow the instructions on the screen when selecting
the wireless network key.
USB dongle has to be introduced to the system during
Wizard or otherwise it won't work properly.
USB dongles that are in the system are listed on the USB Dongles list along with status
information. The status is either connected or disconnected.
• To change name of the USB dongle select the USB dongle from the list and type the new
name into the Name input field.
• To remove a USB dongle from the system select the USB dongle from the list and click
the Remove button.
Synchronize PDA
In order to monitor players' heart rates during online training, player information has to be
transferred to PDA. The feature is called Synchronize PDA and it can be found from main menu:
Tools > Synchronize PDA.