User's Manual

Team2 Help EN
72
How to Search Training Session
For more information, see training session log.
1. Open the Team
2
software and select the team.
2. Open the Training Session Log page.
3. Select either by team or by player depending on your wishes.
4. If you selected by player, select the player from the drop-down list below.
5. Select the training activity or test (or All) from the Training activity drop-down list.
6. Select how you want to limit the date range for the report. The options are Search by
date, Search by period and Quick search.
7. Make the date range selections.
8. Click the Search button to get the training sessions based on the search criteria.
How to Send Training Session Files By E-mail
Training session files can be sent by e-mail. Files can be imported to Team
2
software. This
feature can be useful if a player or another trainer has the software on his/her PC and wishes to
work with the data.
To send training session files:
1. Open the Team
2
software and select the team.
2. Select File > Send E-mail.
3. Select the Training session files button.
4. Select the date range for the training sessions.
5. Select from the players list the players whose training data you want to send.
6. Click the Send button. Your default e-mail software opens. Training session files are an
attachment.
How to Transfer Data from Transmitters' Memory
After online training or off-season period (for example, independent training period), the training
data can be transferred from the transmitters' memory to the PC.
NOTE: Online training data can also be completed by using this feature. Completion can be
needed, for example, if there are gaps in the training data. Use cases:
• There were connection problems between the base station and the PC.
• There were connection problems between the transmitter(s) and the base station (the
transmitter was out of the base station's range).
• There was only a PDA device used during online training and there was no data recorded
onto the PC.
To transfer data from the transmitters' memory:
1. Open the Team
2
PC software.
2. Switch on the base station. Wait until the connection is ready between the base station
and the PC.
3. Insert the transmitters into the charger.
4. Select a team.