User manual

Turning Polar G1 Sensor On/Off
To best catch satellite signals, go outdoors and
away from tall buildings and trees. Press the
button shortly to turn the sensor on. A flashing
battery indicator led (Picture 5 b) shows the
power mode (low/full). Then a red satellite
indicator led (Picture 5 a) will flash as the
sensor searches for satellite signals. The sensor
will find the signals faster if you keep the
sensor immobile during the search. A green led
will start flashing when the signals are found
and location is determined. Your Polar G1
sensor is now ready for action.
To turn the sensor off, press the button for one
second. The power switches off automatically if
the sensor cannot locate satellite signals or the
sensor location does not change for 15 minutes.
Switching Power Mode
You can use the Polar G1 sensor in low or full
power mode. The default mode is full power
mode. By using the low power mode, you can
increase battery life by up to 40 %. For
maximum accuracy of speed and distance
measurement, use full power mode.
When the sensor is activated, press the button
for five flashes to change modes. A battery
indicator led flashes four times; the green led
indicating full power mode activation or the red
led indicating low power mode activation.
Everytime you turn the sensor on, the flashing
led indicates which mode is activated.
ENGLISH
3