User Manual

Information on the display Description
Power Power output expressed in watts (Optional Polar Power Output Sensor
W.I.N.D. required)
Speed Current speed (Polar CS speed sensor W.I.N.D. required)
Stopwatch Total duration of the training session so far
Temperature Current temperature
Time in zone Time you have trained within the heart rate limits
Time of day Time of day
Trip distance Distance between points A and B. Use this function for measuring
distance between two points on the route (Polar CS speed sensor™
W.I.N.D. required). Trip distance can be reset in pause mode.
Your training session is recorded only if the recording has been on for more than one minute or at least one lap has
been stored.
Take a Lap
Take a lap by pressing LAP. The following information is displayed:
Lap time indicates elapsed time for one lap.
Heart rate / Lap number
Split time is elapsed time from the beginning of the training session until storing
the latest lap time.
Average heart rate (calculated from the beginning of the lap)
If you have activated the automatic lap function, your cycling computer automatically records laps when
you reach the set distance. For further information, see Cycling Settings (page 20).
Functions in Pause Mode
To pause the training session, press STOP.
In pause mode, you can select:
ENGLISH
12 Training