Snowmobile Product Name: LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Revision Date: 27 May 2015 Page 1 of 13 Exxon Mobil Chemical Company P.O. Box 3272 Houston, TX 77263-3272 Subject: OSHA Hazard Communication 2012 Combustible Dust Labeling Dear ExxonMobii Customer: As you may be aware, in March 2012, the U.
Snowmobile Product Name: LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Revision Date: 27 May 2015 Pageboy 13 Please find below an OSHA Hazmat 2012 label for LOW DENSITY POLYETHYLENE HOMO POLYMER for combustible dust hazard, LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix SNOWMOBILE CHEMICAL COMPANY Chemicals PS&RA ~ Sass Mail Code: N1.1A.505 P.O. BOX 3272 HOUSTON, TX.
Snowmobile Product Name: LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Revision Date: 27 May 2015 SAFETY DATA SHEET PRODUCT Product Name: LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Product Description: LOPE without polymer processing aid, see Section 16 for applicable grades. intended Use: Coatings, Extrusion and molding, Film blowing COMPANY IDENTIFICATION Supplier: SNOWMOBILE CHEMICAL COMPANY Chemicals PS&RA ~ Sass Mail Code: N1.1A.505 P.O.
Snowmobile Product Name: LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Revision Date: 27 May 2015 Page dof 13 ENVIRONMENTAL HAZARDS No significant hazards. PAN Hazard 1D: Health: 1 Flammability. 1 HIMS Hazard ID: Health: 1 Flammability: _ COMPOSITION / INFORMATION ON INGREDIENTS: This material is defined as a mixture. Hazardous Substance(s} or Complex Substance(s) required for disclosure Name CAS# Concentration® | GHS Hazard Codes ANTIKNOCK < 0.
Snowmobile Product Name: LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Revision Date: 27 May 2015 Page Sof 13 Appropriate Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames. Inappropriate Extinguishing Media: Straight Streams of Water FIRE FIGHTING o Fire Fighting Instructions: Assure an extended cooling down period to prevent re-ignition. Evacuate area.
Snowmobile Product Name: LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Revision Date: 27 May 2015 Pageboy 13 and speed may greatly influence the appropriate action to be taken. For this reason, local experts should be consulted. Note. Local regulations may prescribe or limit action to be taken. ENVIRONMENTAL PRECAUTIONS Prevent entry into waterways, sewers, basements or confined areas. For Large Spills: Cover spill with plastic sheet or tarpaulin to minimize spreading. [BEET ION T .
Snowmobile Product Name: LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Revision Date: 27 May 2015 Pageboy 13 ANTI BLOCK Irreparable TWA 0.026 NiA ACHING faction.
Snowmobile Product Name: LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Revision Date: 27 May 2015 Pageboy 13 Hand Protection: Any specific glove information provided is based on published literature and glove manufacturer data. Glove suitability and breakthrough time will differ depending on the specific use conditions. Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use conditions. Inspect and replace worn or damaged gloves.
Product Name: Revision Date: 27 May 2015 Page 8of 13 Snowmobile LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Solubility in Water: Viscosity: N/A Negligible Oxidizing Properties: See Hazards Identification Section. OTHER INFORMATION Freezing Point: N/D Melting Point: Molecular Weight: > 25000 Gyroscopic: No REACTIVITY: See sub-sections below. 95°C (203°F) 120°C (248°F) [In-house method] Al REACTIVITY STABILITY: Material is stable under normal conditions.
Snowmobile Product Name: LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Revision Date: 27 May 2015 Page Goff 13 for material. structure {polymers). ?Carcinogenicity: No end point data for Not expected to cause cancer. Based on chemical structure material. {polymers}. reproductive Toxicity: No end point data | Not expected to be a reproductive intoxicant. Based on chemical for material. structure {polymers). Lactation: No end point data for material.
Exxon Mobil Product Name: LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Revision Date: 27 May 2015 Page 110f 13 Bio degradation: Material -Expected to be persistent. Hydrolysis: Material -Transformation due to hydrolysis not expected to be significant. Photosynthesis: Material -Transformation due to photosynthesis not expected to be significant. Atmospheric Oxidation: Material -Transformation due to atmospheric oxidation not expected to be significant.
Exxon Mobil Product Name: LOW DENSITY POLYETHYLENE HOMO POLYMER Grades designated by LD prefix Revision Date: 27 May 2015 Page 120f 13 SECTION 15 REGULATORY INFORMATION ] OSHA HAZARD COMMUNICATION STANDARD: This material is considered hazardous in accordance with OSHA Hazmat 2012, 28 CFR 18101200 Listed or exempt from oversimplification on the following chemical inventories: SCAT CRAPE SECTION 302: This material contains no extremely hazardous substances.