User manual

The scale can be paired with 7 different Polar devices. When the number of paired devices exceeds 7, the

first pairing will be removed and replaced.

PAIR A MOBILE DEVICE WITH V800

Before pairing a mobile device, create a Polar account if you do not already have one, and download Flow app

from the App Store or Google Play. Make sure you have also downloaded and installed FlowSync software

onto your computer from flow.polar.com/start , and registered your V800 in the Flow web service.

Before trying to pair, make sure your mobile device has Bluetooth turned on, and airplane mode/flight mode is

not turned on.

To pair a mobile device:

1. On your mobile device, open Flow app and sign in with your Polar account.

2. Wait for the Connect product view to appear on your mobile device (Searching for Polar V800) is dis-

played.

3. In V800 time mode, press and hold BACK.

4. Connecting to device is displayed, followed by Connecting to app.

5. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your

V800.

6. Pairing completed is displayed when you are done.

1. On your mobile device, open Flow app and sign in with your Polar account.

2. Wait for the Connect product view to appear on your mobile device (Waiting for V800) is displayed.

3. On V800, go to Settings > General settings > Pair and sync > Pair and sync mobile device and

press START

4. Press START, Connecting to device is displayed, followed by Connecting to app.

5. Accept the Bluetooth pairing request on your mobile device and type in the pin code shown on your

V800.

6. Pairing completed is displayed when you are done.

DELETE A PAIRING

To delete a pairing with a sensor or mobile device:

1. Go to Settings > General settings > Pair and sync > Paired devices and press START.

2. Choose the device you want to remove from the list and press START.