User manual

99
IMPORTANT INFORMATION
Caring for Your V800 99
V800 99
Heart rate sensor 99
Stride Sensor Bluetooth® Smart, Speed Sensor Bluetooth® Smart and Cadence Sensor Bluetooth®
Smart 100
Storing 100
Service 100
Technical Specification 101
V800 101
H7 Heart Rate Sensor 102
Polar FlowSync Software and USB Cable 102
Polar Flow Mobile Application Compatibility 103
Water Resistance 103
Batteries 103
Changing Heart Rate Sensor Battery 104
Precautions 105
Interference During Training 105
Minimizing Risks When Training 105
Limited International Polar Guarantee 107
Compliance Statement 108
Disclaimer 109
CARING FOR YOUR V800
Like any electronic device, Polar V800 should be treated with care. The suggestions below will help you fulfill
guarantee obligations and enjoy this product for many years to come.
V800
Keep your training device clean. Use a damp paper towel to wipe dirt from the training device. To maintain the
water resistance, do not wash the training device with a pressure washer. Never use alcohol or any abrasive
material such as steel wool or cleaning chemicals.
After each time of using the USB port of the training device, check visually that there is no hair, dust or other
dirt on the connector. Gently wipe to remove any dirt from the connector pins by using a dry cleaning cloth (like
one used to clean glass surfaces). A toothpick can be used to remove hair, dust or other dirt from the
connector cavity. Rinse the USB connector with lukewarm water after each session.
The combined impact of moisture and intense abrasion may cause a darker color to come off clothing possibly
staining the blue-colored V800.
Operating temperatures are -10 °C to +50 °C / +14 °F to +122 °F.
HEART RATE SENSOR
Connector: Detach the connector from the strap after every use and dry the connector with a soft towel.
Clean the connector with a mild soap and water solution when needed. Never use alcohol or any abrasive