Operation Manual

1. Plug your A360 to your computer with the USB cable.

2. FlowSync starts syncing your data.

3. After syncing, you are asked to update the firmware.

4. Choose Yes. New firmware is installed (this may take some time), and A360 restarts.

You won't lose any data due to the firmware update: Before the update begins, the data from your A360 is

synced to the Flow web service.

WITH MOBILE DEVICE OR TABLET

You can also update the firmware with your mobile device if you're using Polar Flow mobile app to sync your

A360 training and activity data. The app will let you know if there's an update available and will guide you

through it. We recommend you plug in the A360 to a power source before starting the update to ensure flaw-

less update operation.

The wireless firmware update may take up to 20 minutes, depending on your connection.

FLIGHT MODE

Flight mode cuts off all wireless communication from your A360. You can still use it, but you can't sync your

data with the Polar Flow mobile app or use it with any wireless accessories.

TURN FLIGHT MODE ON

1. Press and hold the button until you see an airplane icon. First you'll see the pair/sync notification, just

keep pressing the button until the airplane icon shows up..

2. Tap the icon and FLIGHT MODE ON is shown.

TURN FLIGHT MODE OFF

1. Press and hold the button until you see an airplane icon.

2. Tap the icon and FLIGHT MODE OFF is shown.

CONTROL MENU

In Control menu you can toggle Flight mode and Do not disturb mode on and off, power the device down, reset

Bluetooth connections and see device-specific information.