Operation Manual

Polar BodyAge System
Main Unit Power
Using the main power cable, plug the system into a wall outlet. Power is applied to the system
via the power entry module located on the left rear of the cart.
1. Plug power
cable into a wall
outlet.
2. Always use
the system main
power switch to
turn the entire
system on and
off. On is “|”
and off is “o”.
Power Entry Module Information
The power entry module is a switchable power supply between 110v (USA and Canada) and
230v (European). The unit is shipped from the factory with the 230v selected.
Fuse Types:
For the 110Volt (USA and Canada), the fuses are ¼ x 1 ¼” 250Volt, 2 Amps, Slow Blow Fuses.
For the 230Volt (European), the fuses are 5mm x 20mm, 250Volt, 3.0-3.5 Amp Slow Blow Fuses.
Replacing the Fuses:
102