Operation Manual

Polar BodyAge System
You can define two separate heart rate zones based on Maximum heart rate and Anaerobic
threshold.
First select Maximum heart rate or Anaerobic threshold from the drop-down list. Then define
the lower limit for each zone. The upper limits will adjust automatically.
Cardiovascular Settings
Select System Settings > Test Environment. Choose Cardiovascular from the Test
Environment Settings view.
Enter the following information if you are doing cardiovascular testing with a cardio device (i.e.
ergometer or treadmill).
Select the correct device from the drop-down list next to Cardio Device.
Select the Heart Rate Device that you will be using for the cardiovascular testing: WindLink,
Magnum Upright Ergometer or Polar Interface box.
Attach the cardio device directly to the computer and select the serial port that it is connected to
from the drop-down list next to Serial Port.
Enter the following information if you are taking a cardio test without a cardio device attached to
the BodyAge System.
126