Operation Manual

Polar BodyAge System
• Consider dismounting the monitor and wrapping with bubble wrap.
• Secure the printer on its tray with an elastic cord around the top of the printer or use stretch
wrap.
• Avoid laying the system on its side. The central processing unit is not secured with anything
except the materials you place in the compartment. If you must lay it down, make sure the CPU
compartment opening is facing upwards.
Preparations
Recommendations for Operating Staff
It is recommended that ALL OPERATORS have a basic understanding of Windows operating
system. If not, it is recommended that the primary operator take a course in the basic operation
of Windows.
Polar recommends that the operator of the Polar BodyAge® System be certified in CPR and hold
a certification in fitness assessment or sports degree.
Turning on The Polar BodyAge System Power
1. Turn on the system main power switch located at the left side of the cart.
2. When the power is applied to the unit, a green light appears in the interface box above the
power indicator and you hear a start-up verification sound.
24