Operation Manual

Polar BodyAge System SW Help
AutoPilot will automatically run with the test protocol that you select. To change the test protocol
settings or selection, see
Test Protocols and Adding, Editing or Deleting a Test Protocol for
instructions.
1. Click Testing to open the drop-down box and select New Record Using AutoPilot to create a
new test record or Edit Test Record Using AutoPilot to edit an existing test record.
2. A new screen will appear. This is the first assessment to complete in order to run a complete
test protocol.
3. When you are finished with the first assessment, click OK in the lower right corner and you will
be automatically forwarded to the next assessment.
4. To close AutoPilot and return to the main screen, click on the
button.
To view an existing record, use the arrows or the drop down menu shown below:
Testing Manually
After you have created a new client (see Adding a New Client), you can create a record for that
client.
Every time you add a new client, your main testing screen will be disabled until you click Testing
and make your selection:
53