Operation Manual

Polar BodyAge System
Support for the Polar BodyAge System
Troubleshooting
Computer will not turn on
1. Turn the main power switch, located on the right side of the computer compartment, off and on.
If power is applied, the switch will glow red.
2. Hold the power button on the front of the CPU down for 2 seconds. If the switch glows green,
power is on.
3. Unplug the unit and test the wall power outlet with an electrical appliance (such as a lamp). If
outlets are changed, repeat steps 1 and 2.
4. Unplug the ROM cable from the system interface. Slowly remove the computer and set it down
directly behind the cart. Make sure the power cable is securely plugged in on the back of the
case as well as the surge protector.
5. Repeat steps 1 and 2.
78