User Guide

In the cycling computer, these values are used to calculate your energy expenditure.
Heart Rate: HR
max
, HR
sit
HR
max
(Maximum heart rate): Your age-predicted HR
max
value (220 - age) is used as a default. Set your
HR
max
manually if your maximum heart rate has been determined in a lab, if you have performed the
Fitness test with the Polar CS400 cycling computer, or if you have tested your maximum heart rate in the
field yourself.
HR
sit
(Heart rate value in a sitting position): Your age-predicted HR
sit
value is used as a default. Set your
HR
sit
value if you have determined it according to the instructions. For instructions, see Heart Rate Value
in a Sitting Position (page 43)in Background Information.
Maximal Oxygen Intake: VO
2max
VO
2max
is your body’s maximum capacity for oxygen consumption during maximum exertion. The most
accurate way of determining VO
2max
is to perform a maximal stress test in a laboratory. If you know your
exact clinically-tested VO
2max
, set the value in the cycling computer. Otherwise, measure a comparable
value, OwnIndex, by taking the Polar Fitness Test. For further information, see Polar Fitness Test™
(page ? ).
If changes are made to the user settings, User settings updated is displayed.
You can enter and edit user settings by using the Polar ProTrainer 5 software. For further information,
consult software help.
General Settings
Sound
Select Settings > General > Sound
Volume
Select Settings > General > Sound > Volume > On / Off
Volume settings control button sounds and activity sounds during exercise. This does not affect the watch
or target zone alarms (TZ Alarm).
TZ Alarm (Target Zone Alarm)
You can set the TZ Alarm On/ Off:
Select Settings > General > Sound > TZ Alarm > On /Off
If the target zone alarm is deactivated, the heart rate reading will flash when you are outside the target
zone.
Keylock
To define keylock settings
Select Settings > General > Keylock > Manual / Automatic
Keylock prevents accidental button presses.
Manual: Activate the manual keylock.
Automatic: Keylock is activated in time mode when buttons have not been pressed for one minute.
To turn the keylock On/Off, press and hold the LIGHT for at least a second.
ENGLISH
Settings 31