USER MANUAL
CONTENTS Contents Introduction Get started Speed sensor parts Installing the speed sensor Pairing Important information Care and maintenance Battery Frequently asked questions Technical Specification 2 3 4 4 5 6 7 7 7 7 8 2
INTRODUCTION Polar Speed Sensor is designed to measure speed and distance when cycling. The sensor is compatible devices that support Bluetooth® Cycling Speed Service. You can use your sensor with dozens of leading fitness apps, as well as with Polar products using Bluetooth® technology. Check the compatible products at support.polar.com/en. The latest version of this user manual can be downloaded at support.polar.com/en.
GET STARTED SPEED SENSOR PARTS 1. Speed sensor (pictures 1 A and 2 A) 2. Spoke magnet (picture 2 B) Picture 1. Picture 2.
INSTALLING THE SPEED SENSOR To install the speed sensor and spoke magnet, you need cutters and a cross-head screwdriver. 1. It is recommended to install the speed sensor on the front fork of your bicycle (as in picture 1 A). 2. Attach the rubber part to the speed sensor (picture 3). Picture 3.
3. Pass the cable ties over the speed sensor and rubber part (picture 2 A). Adjust the sensor to the front fork so that the POLAR logo faces outwards. Adjust the ties loosely. Do not tighten them fully yet. 4. Attach the magnet to a spoke at the same level as the speed sensor (picture 2). There is a small caved dot on the backside of the sensor (picture 3 A), which indicates the spot the magnet should be pointing at when passing the sensor.
IMPORTANT INFORMATION CARE AND MAINTENANCE Keep the sensor clean. Clean it with a mild soap and water solution, and rinse off with clean water. Dry carefully with a soft towel. Never use alcohol or any abrasive material, such as steel wool or cleaning chemicals. Do not immerse the sensor in water. Your safety is important to us. Make sure that you can turn your handlebars normally and that the cable wires for brakes or gears do not catch the bike mount or sensor.
TECHNICAL SPECIFICATION Operating temperature: -10 °C to +50 °C / 14 °F to 122 °F Battery life: Average 1400 hours of use. Accuracy: ±1 % Material: Thermoplastic polymer Water resistance: Splash proof FCC ID: INWY6 Speed Sensor Bluetooth QD ID: B021136 Copyright © 2021 Polar Electro Oy, FI-90440 KEMPELE. All rights reserved. No part of this manual may be used or reproduced in any form or by any means without prior written permission of Polar Electro Oy.
