Operation Manual

Polar MobileLInk to Running Getting started •
••
• 2
Getting started
Configuration
Polar MobileLink to Running mobile application is designed for the Polar S625X
running computer and the Nokia 5140 mobile phone. Optionally, you can use the
Polar S725 with this application.
Installing Polar MobileLink in your mobile phone
You can download the application from Nokia Software Market or from Handango
directly to your phone over the air (OTA) in GPRS network.
1. Visit www.softwaremarket.nokia.com
or www.handango.com and locate the
required Polar MobileLink application.
2. Proceed with the downloading instructions on the page.
Payment can be made by credit card.
Before downloading the application check that you have the required connectivity
settings (WAP/GPRS) in your mobile phone:
1. Select Settings – Connectivity – GPRS. Then select When needed
or Always online depending on whether you want the connection
active when you would like use it or on continuously.
2. Select Services – Settings – Connection settings – Active service
settings. Then select the WAP service you would like to use.
If you do not have the required connectivity settings installed in you mobile phone,
you can order them from your Mobile Network Operator, or at
www.softwaremarket.nokia.com
.
You can check that the GPRS connection is working properly by pressing
and holding the zero-key. The GPRS connection should start and the service
provider's WAP portal should then open.
Some operators may not support buying the application over the air (OTA). For
further assistance, please contact your Mobile Network Operator.