Operation Manual

Attach Foot Pod on Shoe
To measure speed/pace and distance accurately,
make sure the foot pod is correctly positioned.
1. Undo the flap and detach the foot pod from
the fork (see picture 3).
2. Loosen your shoelaces and place the fork
underneath them, on top of the tongue of
the shoe (see picture 4). Tighten the laces.
3. Fit the front part of the foot pod (closest to
the red button) to the fork and press from
the rear (see picture 5). Fasten the flap.
Make sure the foot pod does not move and
is aligned with your foot. The more secure
the sensor, the more accurately speed and
distance are measured.
4. Turn the foot pod on before exercising.
Press and hold the red button on the foot
pod until the green light starts flashing (see
picture 6).
5. After exercising, turn the foot pod off by
pressing and holding the red button until
the green light switches off.
ENGLISH
2