User manual

V800.

7. Pairing completed is displayed when you are done.

DELETE A PAIRING

To delete a pairing with a sensor or mobile device:

1. Go to Settings > General settings > Pair and sync > Paired devices and press START.

2. Choose the device you want to remove from the list and press START.

3. Delete pairing? is displayed, choose Yes and press START.

4. Pairing deleted is displayed when you are done.

SYNCING

You can transfer data from your V800 via the USB cable with FlowSync software or wirelessly via Bluetooth

Smart® with the Polar Flow app. To be able sync data between your V800 and the Flow web service and app,

you need to have a Polar account and FlowSync software. Go to flow.polar.com/start, and create your Polar

account in the Polar Flow web service and download and install FlowSync software onto your PC. Download

Flow app onto your mobile from the App Store.

Remember to sync and keep your data up-to-date between your V800, the web service and the mobile app

wherever you are.

SYNC WITH FLOW APP

Before syncing make sure:

l You have a Polar account and Flow app

l You have registered your V800 in the Flow web service and synced data via FlowSync software at

least once.

l Your mobile device has Bluetooth turned on, and airplane mode/flight mode is not turned on.

l You have paired your V800 with your mobile. For more information , See "Pairing" on page 22

There are two ways to sync your data:

1. Sign into Flow app and press and hold the BACK button on your V800.

2. Connecting to device is displayed, followed by Connecting to app.

3. Syncing completed is displayed when you are done.