User manual
82
4. Pairing completed is displayed when the pairing is complete.
5. Sensor linked to: is displayed. Choose Bike 1 or Bike 2. Confirm with START.
6. Set wheel size is displayed. Set the size and press START.
or
1. Go to General Settings > Pair and sync > Pair new device and press START.
2. V800 starts searching for the speed sensor. Rotate the wheel a few times to activate the sensor. The
flashing red light in the sensor indicates that the sensor is activated.
3. Once the speed sensor is found, Polar SPD xxxxxxxx is displayed.
4. Press START, Pairing is displayed.
5. Pairing completed is displayed when the pairing is complete.
6. Sensor linked to: is displayed. Choose Bike 1 or Bike 2. Confirm with START.
7. Set wheel size is displayed. Set the size and press START.
MEASURING WHEEL SIZE
Wheel size settings are a prerequisite for correct cycling information. There are two ways of determining the
wheel size of your bike:
Method 1
Look for the diameter in inches or in ETRTO printed on the wheel. Match it to the wheel size in millimeters in
the right column of the chart.
ETRTO Wheel size diameter (inches) Wheel size setting (mm)
25-559 26 x 1.0 1884
23-571 650 x 23C 1909
35-559 26 x 1.50 1947
37-622 700 x 35C 1958
52-559 26 x 1.95 2022
20-622 700 x 20C 2051
52-559 26 x 2.0 2054
23-622 700 x 23C 2070
25-622 700 x 25C 2080
28-622 700 x 28 2101
32-622 700 x 32C 2126