User manual
85
CALIBRATE KÉO POWER
Calibrate Kéo Power before starting your session. V800 calibrates itself automatically each time the
transmitters wake up and V800 is found. The calibration takes a couple of seconds.
Training temperature has an effect on the calibration accuracy, so make sure your bike’s temperature has
become stable before you start the offset calibration.
To calibrate Kéo power:
1. Wake up the transmitters by rotating the cranks and choose pre-training mode on your V800 to start the
calibration.
2. Keep the bike upright and cranks in place until calibration is completed.
To ensure the calibration is done properly:
l Do not put any weight on the pedals during calibration.
l Do not interrupt the calibration.
When the calibration is complete a green LEDwill blink on the transmitters, and you can start your session.