User manual

79
SENSORS
Polar Stride Sensor Bluetooth® Smart 79
Pair a Stride Sensor with V800 79
Calibrate the Stride Sensor 79
Manual Calibration 80
Automatic Calibration 80
Running Cadence and Stride Length 81
Polar Speed Sensor Bluetooth® Smart 81
Pair a Speed Sensor with V800 81
Measuring Wheel Size 82
Polar Cadence Sensor Bluetooth® Smart 83
Pair A Cadence Sensor with V800 83
Polar LOOK Kéo Power Sensor Bluetooth® Smart 84
Pair Kéo Power with V800 84
Power Settings on V800 84
Calibrate Kéo Power 85
POLAR STRIDE SENSOR BLUETOOTH® SMART
PAIR A STRIDE SENSOR WITH V800
Make sure the stride sensor has been correctly attached to your shoe. For more information on setting up the
stride sensor refer to the user manual of the stride sensor.
There are two ways to pair a stride sensor with your V800:
1. Press START in time view to enter pre-training mode.
2. Touch your stride sensor with V800, and wait for it to be found.
3. The device ID Pair Polar RUN xxxxxxxx is displayed. Choose Yes.
4. Pairing completed is shown when you are done.
or
1. Go to General Settings > Pair and sync > Pair new device and press START.
2. V800 starts searching for your stride sensor.
3. Once the stride sensor is found, Polar RUN xxxxxxxx is displayed.
4. Press START, Pairing is displayed.
5. Pairing completed is displayed when you are done.
CALIBRATE THE STRIDE SENSOR
Calibration of the stride sensor improves the accuracy of speed/pace and distance measurements. It is
recommended that you calibrate the stride sensor before using it for the first time, if there are significant
changes in your running style, or if the position of the stride sensor on the shoe is dramatically changed (e.g. if
you have new shoes or if you switch the sensor from your right shoe to your left one). The calibration should