POLAR WEARLINK+ TRANSMITTER NIKE+ User Manual
ENGLISH Polar WearLink® Transmitter Nike+ This user manual contains instructions for the Polar WearLink transmitter Nike+. The heart rate sensor is compatible with Nike + iPod, Nike+ SportBand and Polar training computers using GymLink technology, such as FT80, FT60, RS300X, and CS400. For detailed list of compatible products, go to www.polar.com. The latest version of this user manual can be downloaded at www.polar.com/support. For video tutorials, go to www.polar.com/support/video_tutorials.
. 5. Tie the strap around your chest, just below the chest muscles, and attach the hook to the other end of the strap. Picture B3. Check that the moist electrode areas are firmly against your skin and that the Polar logo of the connector is in a central and upright position. Picture B4. Detach the connector from the strap and rinse the strap under running water after every use. See detailed washing instructions in the Caring for Your Heart Rate Sensor section.
1. Wear the heart rate sensor. Make sure there are no other shoe sensors or heart rate sensors nearby. 2. Press and hold the TOGGLE button on the Nike SportBand for 3 seconds. A blinking Link message appears on the SportBand display, followed by OK. For more information on the Nike+ SportBand, see the complete manual available at www.nikeplus.com/downloads . Caring for Your Heart Rate Sensor The heart rate sensor is a high-tech instrument that should be handled with care.
Check the label on your strap to see if it is machine washable. Never put the strap or the connector in a dryer! Service During the warranty period, service the product at an authorized Polar Service Center only. The warranty does not cover damage caused by unauthorized service. See Limited International Polar Guarantee. Batteries To change the battery yourself, follow the instructions below, and see the markings on the connector and picture C on the front cover of this user manual. 1. 2. 3. 4.
Precautions For allergy information, see the listed materials in Technical Specifications. Avoid skin reactions by wearing the heart rate sensor over a shirt, moistened under the electrodes. The combined impact of moisture and intense abrasion may cause a black color to come off the heart rate sensor’s surface, possibly staining light-colored clothes. If you use perfume or insect repellent on your skin, you must ensure that it does not come into contact with the heart rate sensor.
Limited International Polar Guarantee • This guarantee does not affect the consumer’s statutory rights under applicable national or state laws in force, or the consumer’s rights against the dealer arising from their sales/purchase contract. • This limited Polar international guarantee is issued by Polar Electro Inc. for consumers who have purchased this product in the USA or Canada.
This product is compliant with the Directives 93/42/EEC, 1999/5/EC and 2011/65/EU. The relevant Declaration of Conformity is available at www.support.polar.com /declaration_of_conformity.html. Regulatory information is available at www.polar.com/support. Compliance Statement Canada Polar Electro Oy has not approved any changes or modifications to this device by the user. Any changes or modifications could void the user’s authority to operate the equipment.
Avis de conformité à la réglementation d’Industrie Canada Conformément à la réglementation d'Industrie Canada, le présent émetteur radio peut fonctionner avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
This crossed out wheeled bin marking shows that Polar products are electronic devices and are in the scope of Directive 2002/96/EC of the European Parliament and of the Council on waste electrical and electronic equipment (WEEE) and batteries and accumulators used in products are in the scope of Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators and waste batteries and accumulators.
Disclaimer The material in this manual is for informational purposes only. The products it describes are subject to change without prior notice, due to the manufacturer’s continuous development program. Polar Electro Inc. / Polar Electro Oy makes no representations or warranties with respect to this manual or with respect to the products described herein. Polar Electro Inc.
Manufactured by Polar Electro Oy Professorintie 5 FIN-90440 KEMPELE Tel +358 8 5202 100 Fax +358 8 5202 300 www.polar.
